Flush 30 Cubicle Range

The affordable flush fronted cubicle solution.

At Excelsior we have designed the Flush 30 system to be the affordable industry flush facade cubicle offer. Available with HPL surface finishes, Aluminium extruded rebated meeting stiles and SBAA ironmongery as standard.

The Flush 30 is available in two standard formats.

1. 2100mm overall proprietry height incorporating a 150mm pedestal leg and SAA 38mm U section headrail.

2. Upto 3000mm overall proprietry height incorporating either a 150mm pedestal leg or floor channel (50mm and 100mm legs also available). SAA 38mm U section headrail (top fix to void space above) or SAA 40mm P section headrail (back fix if limited void space above).

Both formats incorporate Aluminium ironmongery as standard with outward opening doors complete with D handles to assist access where doors are set to full closed. (Stainless Steel Ironmongery available upon request)

Flush 30 is available with High Pressure Laminate PUR bonded onto a 28mm MR core, complete with Aluminium extruded door and pilaster edges.

The Flush 30 range is available on a typical delivery period of 3-4 weeks from receipt of approved drawings.

Installation by Excelsior is strongly recommended but not essential as a full set of fixing instructions and technical information is provided with the system.

Recommended Sectors:
Commercial Offices
Education
Leisure

Flush 30 Cubicle
(2100mm high)

Specifications

Doors and Pilasters:
High Pressure Laminate PUR bonded onto 28mm MR core.
Rebated Aluminium edges to Excelsior detail.

Divisions:
High Pressure Laminate PUR bonded onto 18mm MR core
Matching laminate or 2mm ABS edge detail

Standard Dimensions:
2100mm overall height (c/w 150mm leg) x 1500mm deep
All Heights Subject to Material/Colour Selection

Ironmongery:
Self Closing Hinges - Ref: EXH-A30L/R
Indicator and Keep - Ref: EXL-A30, EXK-AF30(Keep)
Leg 150mm -Ref: EXL- A150
Coat Hook - Ref: EXCH-A20
Continuous wall channel - Ref: ALSP3992
Continuous division channel - Ref: ALSP3978
Headrail - TLine 38mm ‘U’ section SAA
Headrail End Caps - Ref: 38mm end

(Toilet Roll Holder & Accessories available upon request)

Flush 30 Cubicle
(upto 3000mm High)

Specifications

Doors and Pilasters:
High Pressure Laminate PUR bonded onto 28mm MR core
Rebated Aluminium edges to Excelsior detail.

Divisions Specification:
High Pressure Laminate PUR bonded onto 18mm MR core
Matching laminate or 2mm ABS edge detail

Standard Dimensions:
Upto 3000mm overall height (Leg options available) x 1500mm deep (horizontal joint to suit)

All Heights Subject to Material/Colour Selection

Ironmongery:
Self Closing Hinges - Ref: EXH-A30L/R
Indicator and Keep - Ref: EXL-A30, EXK-AF30(Keep)
Floor Fixed U Channel or Leg Option
Coat Hook - Ref: EXCH-A20
Continuous wall channel - Ref: ALSP3992
Continuous division channel - Ref: ALSP3978
Headrail SAA - Ref: EXPHR20 P Section 40mm
Headrail End Caps - Ref: 38mm end
Leg Options: 150mm - Ref: EXL-A150, 100mm - Ref: EXL-A100, 50mm - Ref: EXL-A50

(Toilet Roll Holder & Accessories available upon request)

Ironmongery Finish: Aluminium as standard. (Stainless Steel available upon request)
Colour Selections: Excelsior Preferred Cubicle & Washroom Colour Selection.
Special Notes: Outward opening doors complete with back to back Aluminium ‘D’ Handles.
Leg Options: 150mm as standard with 100mm & 50mm options.

We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.