Flush 30 Cubicle Range

The affordable flush fronted cubicle solution.

At Excelsior we have designed the Flush 30 system to be the affordable inductry flush facade cubicle offer. Available with HPL surface finishes, hardwood on laminate rebated meeting stiles and stainless steel ironmongery.

The Flush 30 is available in two standard formats.

1. 1960mm overall proprietry height incorporating a 150mm pedestal leg and SAA 38mm U section headrail.

2. Upto 2700mm overall proprietry height incorporating a 150mm pedestal leg (or floor channel if required) and SAA 38mm U section headrail (stop fix it voidspace above) or SAA 40mm P section headrail (back fix if limited void space above).

Both formats incorporate stainless steel ironmongery as standard and are DDA complient with outward opening doors complete with D handles to assist access where doors are set to full closed.

Flush 30 is available with high pressure laminate PUR bonded onto a 28mm MR core, complete with a choice of rebated ABS lipped edges to doors and pilasters.

The Flush 30 range is available on a typical delivery period of 3-4 weeks from receipt of approved drawings.

Installation by Excelsior is strongly recommended but not essential as a full set of fixing instructions and technical information is provided with the system.

Recommended Sectors:
Commercial Offices
Education
Leisure

Flush 30 Cubicle
(1960mm high)

Specifications

Doors and Pilasters:
High Pressure Laminate PUR bonded onto 28mm MR core.
Rebated HPL/ABS to Excelsior detail.

Divisions:
High Pressure Laminate PUR bonded onto 18mm MR core
Matching laminate or 2mm ABS edge detail

Standard Dimensions:
1960mm overall height (c/w 150mm leg) x 1500mm deep
All Heights Subject to Material/Colour Selection

Ironmongery:
Self Closing Butt Hinges - Ref: T120 / T121 SSS
Indicator and Keep - Ref: T201 (30mm)
L/R (to suit handing) and T270 Keep
TLine 38mm ‘U’ section Headrail SAA
Coat Hook - Ref: T501
Wall Pilaster Brackets - Ref: T401 L Bracket
Division/ Pilaster Brackets - Ref:T 411 U Bracket
Leg - Ref: T352 Dome foot support - 150mm

(Excludes Toilet Roll Holder)

Flush 30 Cubicle
(upto 2700mm High)

Specifications

Doors and Pilasters:
High Pressure Laminate PUR bonded onto 28mm MR core
Rebated HPL/ABS to Excelsior detail.

Divisions Specification:
High Pressure Laminate PUR bonded onto 18mm MR core
Matching laminate or 2mm ABS edge detail

Standard Dimensions:
Upto 2700mm overall height (150MM LEG)x 1500mm (horizontal joint to suit)
System available to floor upon request
All Heights Subject to Material/Colour Selection

Ironmongery:
Self Closing Butt Hinges - Ref: T120 / T121 SSS
Indicator and Keep - Ref: T201 (30mm)
L/R (to suit handing) and T270 Keep
P Section 40mm Headrail SAA
Coat Hook - Ref: T501
Wall Pilaster Brackets - Ref: T401 L Bracket
Division/ Pilaster Brackets - Ref:T 411 U Bracket
Leg - Ref: T352 Dome foot support - 150mm
Option available for 20mm or 100mm legs

(Excludes Toilet Roll Holder)

Ironmongery Finish: Satin Stainless Steel as standard.
Colour Selections: Excelsior Cubicle & Washroom Colour Selector.
Special Notes: Outward openg doors complete with back to back Stainless Steel ‘D’ Handles.

We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.