Flush 44 Cubicle Range

The premium flush fronted cubicle solution.

The Flush 44 cubicle range is the genuine ‘premium quality’ system, offering a sleek flush fronted facade, and with surface finishes available in both HPL and Natural Veneer, allowing the the most discerning specifier complete satisfaction in their selection.

We offer the Flush44 in three standard formats:


1. 2100mm overall propriatory height incorporating a 150mm pedestal leg and SAA box headrail.

2. Full height up to 2700mm as standard floor to ceiling option with 38mm divisions set into a ‘U’ section floor channel.

3. Full height 2700mm as standard floor to ceiling option with back to back duct panel divisions offering a 100mm service void.

All three formats incorporate Stainless Steel Ironmongery as Standard and are DDA complient with outward opening doors complete with ‘D’ handles to ease access where doors are set to fall closed.

Flush44 is available in several different surface finishes including High Pressure Laminate and Natural Wood Veneers complete with rebated Hardwood edges to all doors and pilasters.

Typical manufacturing period is 5-6 weeks from receipt of approved drawings and colour selection.

Installation by Excelsior is strongly recommended but not essential as a full set of fixing instructions and technical information is provided with the system.

Recommended Sectors:
Commercial Offices
Leisure

Flush 44 Cubicle
(Floor to Ceiling)

Specifications

Doors and Pilasters:
HPL bonded onto 44mm MR core
Rebated Hardwood Edges, sealed 2 coats AC Lacquer
Continuous Head Section:
HPL bonded onto 44mm MR core
Rebated Hardwood Edges, sealed 2 coats AC Lacquer
(Natural Veneers & Digital Print HPL available at additional cost)

Divisions Specification:
High Pressure Laminate PUR bonded onto 38mm MR core
Matching laminate edge detail

Standard Dimensions:
Upto 2700mm overall height x 1500mm deep (horizontal joint to suit)

Ironmongery:
Continuous ‘T’ section Pilaster fixing channel
11/2 pairs Self Closing Butt Hinges
A9706 SSS Thumb turn Indicator
L63 SSS Tubular 80mm Mortise Deadbolt with Excelsior Wrap striking plate/keep
38mm ‘U’ section floor channel
Coat Hook - Ref:T501
Rear wall ‘T’ section division fixing channel
3mm door/pilaster cushion gasket

(Excludes Toilet Roll Holder)

Flush 44 Cubicle
(2100mm High)

Specifications

Doors and Pilasters:
HPL bonded onto 44mm MR core
Rebated Hardwood Edges, sealed 2 coats AC Lacquer
(Natural Veneers & Digital Print HPL available at additional cost)

Divisions Specification:
High Pressure Laminate bonded onto 36mm MR core
Matching laminate edge detail

Standard Dimensions:
2100mm overall height x 1500mm deep (c/w 150mm Leg)

Ironmongery:
Continuous ‘T’ section Pilaster fixing channel
11/2 pairs Self Closing Butt Hinges
A9706 SSS Thumb turn Indicator
L63 SSS Tubular 80mm Mortise Deadbolt with Excelsior Wrap striking plate/keep
38mm ‘U’ section floor channel
Coat Hook - Ref:T501
Rear wall ‘T’ section division fixing channel
3mm door/pilaster cushion gasket

(Excludes Toilet Roll Holder)

Ironmongery Finish: Satin Stainless Steel as standard.
Colour Selections: Excelsior Cubicle & Washroom Colour Selector.
Special Notes: Outward openg doors complete with back to back Stainless Steel ‘D’ Handles.

We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.