Skyline Cubicle Range

The elegant, & discreet full height system.

Meeting the demands of modern education and mixed use environments, Skyline is a floor to ceiling system providing the user with maximum privacy and comfort. A full range of complimentary duct panels and vanity units are available on request..

from creation to installation... you can rest assured

Perfect for locations where greater user privacy is required. The Skyline system is an extension of general cubicle systems provided as a floor to ceiling application with an aluminium floor channel or an alternative pedestal leg option to create a standard floor clearance.

The Skyline Range is available in 3 different specification board options to meet both budget and durability requirements.

Hardware is available in a standard aluminium finish with bespoke colours and finishes available on request at an additional cost.

Panel and door colours can be selected from a large range of preferred laminate manufacturers.

Wall & duct panelling and fully framed vanity units can be supplied to complement this system.

The Skyline cubicle range is available on a typical delivery basis of 3-4 weeks from receipt of approved drawings and confirmation of all colour finishes.

Installation by Excelsior is strongly recommended but not essential as a full set of fixing instructions and technical information is provided with the system.


Recommended Sectors:
Commercial Offices
Education
Leisure

Skyline 12mm SGL Cubicles
(Floor to ceiling)

Specifications

Doors, Divisions & Pilasters:
12mm solid compact grade laminate
Black core radius & polished edge finish

Standard Dimensions:
Up to 2600mm as standard x 1500mm deep
Up to 3000mm floor to ceiling height available upon request

Ironmongery:
Rise and fall aluminium hinges Ref: EXH-A13
Recessed Indicator and Keep Ref: EXL-A13
Coat Hook - Ref:EXCH-A13
Brackets - Ref: EXB-A3/7 & EXB-A3/8
Headrail - Ref: EXPHR13
Division baserail 13mm SAA U-Channel
(Excludes Toilet Roll Holder)

Skyline 20mm HPL Cubicles
(Floor to ceiling)

Specifications

Doors, Divisions & Pilasters:
High Pressure Laminate PUR bonded onto 18mm MR core
2mm ABS edge finish

Standard Dimensions:
Up to 3000mm floor to ceiling height x 1500mm deep

Ironmongery:
Rise and fall aluminium hinges Ref: EXH-A20
Recessed Indicator and Keep Ref: EXL-A20
Coat Hook - Ref:EXCH-A20
Brackets - Ref: EXB-A3/5
Headrail - Ref: EXPHR20
Division baserail 20mm SAA U-Channel
(Excludes Toilet Roll Holder)

Skyline Summit CDF Cubicles
Floor to ceiling)

Specifications

Doors, Divisions & Pilasters:
13mm Laminated Compact Density Fibreboard.
Black core radius & polished edge finish.

Standard Dimensions:
Up to 3000mm floor to ceiling height x 1500mm deep
All Heights subject to material/colour selection.

Ironmongery:
Rise and fall aluminium hinges - Ref: T100 L or T100 R (to suit handing).
Indicator and Keep -
Ref: T201L or T201R / keep T250/buffer T950.
Coat Hook - Ref: T520.
Brackets - Ref: T410.
Headrail - Ref: EXPHR13 (SAA finish).
Division baserail 13mm SAA U-Channel
(Excludes Toilet Roll Holder)

All Heights subject to material/colour selection

Ironmongery Finish: Aluminium as standard on 12mm SGL and 20mm HPL. Stainless steel as standard on13mm CDF.

Colour Selections: Excelsior Cubicle & Washroom Colour Selection

Special Notes:
Outward opening doors complete with back to back St/Steel ‘D’ Handles and full length ‘Z’ Section door Stop/Keep Partitions are supplied in 2 pieces to meet CDM/Manual Handling constraints. Partitions fitted into floor fixed U channel and finished 20mm below ceiling. Headrail detail fitted to top of pilaster internal face..
Doors with over-panels supplied as standard detail (full length doors available upon request)
Partitions fitted into floor fixed U-channel and finished 20mm below ceiling height
Doors & Pilasters 10mm Floor Clearance

We recommend that outward opening doors open onto an adjacent solid wall to prevent over strain on hinges.