Summit CDF Range

Summit CDF Range.

Our SUMMIT CDF cubicle range is produced using sustainable & certified panel materials complete with ironmongery of which all are 100% recyclable at the end of their lifespan.

CDF is produced in Switzerland using...

certified and sustainable materials and manufactured into cubicle and washroom components at our factory in the West Midlands.

Bio mass energy is used to produce these innovative panels. The energy generated from this environmentally friendly process is 95% renewable verses more than 80% fossil fuels used for the production of similar or existing materials.

CDF is more than 350kilos m3 (30%) lighter in weight verses compact grade laminate, as such the consumption of fossil fuels for transportation as well as the impact on the environment is significantly reduced.

Being 30% lighter in weight also highlights that less phenol resin is used in the production of CDF again benefitting the environment and the panels are 100% recyclable at the end of their life span as they can be processed back into fibres to make new panels.

CDF can also be burnt in biomass without impact to the environment to create energy.

Summit CDF Cubicle Range

Panel Specification:

Doors, Divisions and Pilasters:
13mm Laminated Compact Density Fibreboard.
Black core radius & polished edge finish.

Standard Dimensions:
• 2000mm overall height (c/w 150mm leg) x 1500mm deep.
All Heights Subject to Material/Colour Selection

Ironmongery:
Rise and fall aluminium hinges - Ref: T100 L or T100 R (to suit handing).
Indicator and Keep - Ref: T201L or T201R / keep T250/buffer T950.
Leg 150mm - Ref: T300.
Coat Hook - Ref: T520.
Brackets - Ref: T410.
Headrail - Ref: EXPHR13 (SAA finish).
Headrail End Caps - Ref: EXHREND.

Toilet Roll Holders & Accessories available on request.

Ironmongery Finish:
Stainless Steel (SAA also available upon request).

Notes: Various door heights available subject to age group.

Summit CDF Skyline Cubicle Range

Panel Specification:

Doors, Divisions and Pilasters:
13mm Laminated Compact Density Fibreboard.
Black core radius & polished edge finish.

Standard Dimensions:
Upto 2800mm overall height (c/w 150mm leg or floor channel & door overpanel) x 1500mm deep.
All Heights Subject to Material/Colour Selection

Ironmongery:
Rise and fall aluminium hinges - Ref: T100 L or T100 R (to suit handing).
Indicator and Keep - Ref: T201L or T201R / keep T250/buffer T950.
Leg 150mm - Ref: T300 OR SAA ‘U’ Channel.
Coat Hook - Ref: T520.
Brackets - Ref: T410.
Headrail - Ref: EXPHR13 (SAA finish).
Headrail End Caps - Ref: EXHREND.

Toilet Roll Holders & Accessories available on request.

Ironmongery Finish:
Stainless Steel (SAA also available upon request).

Summit CDF Wall & Ducting Range

Full Height Panel Specification:
13mm Laminated Compact Density Fibreboard.
Black core radius & polished edge finish.
Panels split to suit sanitaryware.

Plinth/ Shadowgaps:
High Pressure Laminated 18mm MR high density V313 chipboard core.
Plinth incorporates 1mm PVC edge detail at floor junction to prevent moisture ingress.
All remaining egdes as cut.

Frame Construction / System Support:
Sole Plate - 25mm WBP plywood (to be packed level to 25mm AFFL).
Subframe - 18/36mm MR MDF pre-assembled frame.
Panels pre-hung onto subframe using nylon push fit Ke-Ku clips and zinc coated steel hook on slip cleats.

Special Notes:
Excelsior standard support systems may not be compatible with all sanitary flushing systems, therefore please enquire prior to placing order to ensure adaptations can be incorporated.

Hinged access panels c/w keyed budget locks available at additional cost.

Summit CDF Vanity Unit Range

Profile Options:
SGIN1 - 600mm bed depth x 800mm o/a height (c/w 75mm upstand/200mm downstand) To suit Inset WHB.
SGIN2 - 600mm bed depth x 800mm o/a height (no rear upstand/200mm downstand) To suit Inset WHB.
SGSR1 - 315mm bed depth x 800mm o/a height (c/w 75mm upstand/300mm d/stand) To suit Semi-recessed WHB.
SGSR2 - 315mm bed depth x 800mm o/a height (no rear upstand/300mm d/stand) To suit Semi-recessed WHB.

Worktop Specification:
Laminate faced 10mm compact density fibreboard.
Special CNC and post-formed integral rear upstand and front downstand (subject to profile selection).

Access Panel Specification:
13mm Laminated Compact Density Fibreboard.
Black core radius & polished edge finish.

Underpanels Fascia/ Shadowgaps:
High Pressure Laminate bonded onto 18mm MR MDF Core.
Plinth incorporates 1mm PVC edge detail at floor junction to prevent moisture ingress.
All remaining egdes as cut.

Frame Construction / System Support:
Subframe and base rail - 18/36mm pre-laminated MR MDF CNC formed sections.


Colour Selections: Excelsior Kronoswiss CDF Cubicle & Washroom Colour Selections.
Special Notes: If applicable: Outward opening doors come complete with back to back St/Steel ‘D’ Handles and full length ‘Z’ Section door Stop/Keep..

We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.