T-Line Cubicle Range

The modern & minimalist cubicle solution.

The T-Line cubicle rangehas been created to meet the most discerning specifiers’ requirements. Bringing a modern and minimalist feel to the washroom environment in the form of Extruded Satin Anodised Aluminium pilasters and headrail offering a true slimline appearance, this in conjunction with 20mm thick doors on our HPL option really does exceed all quality expectations..

from creation to installation... you can rest assured

T-Line’s specially designed extrusions allow all the doors to sit in the same plane. This system sits equally at home in many different environments from the most prestigious office or hotel development to education or healthcare projects alike.

Wall & duct panelling and fully framed vanity units can be supplied to complement this system.

The T-line range is available on a typical delivery period of 3-4 weeks from receipt of approved drawings and confirmation of all colour finishes.

Installation by Excelsior is strongly recommended but not essential as a full set of fixing instructions and technical information is provided with the system.



Recommended Sectors:
Commercial Offices
Education
Leisure
Transport
Healthcare

T LINE 20mm
HPL Cubicle

Specifications

Pilasters and Headrail:
Extruded Aluminium Pilaster and Headrail profiles - SAA as standard
Hybrid & Nickel powder finishes available upon request

Doors & Divisions Panel Specification:
HPL bonded onto 18mm MR core
2mm ABS edge finish

Standard Dimensions:
2000mm overall height (including 150mm ground clearance & 40mm headrail) x 1500mm deep

Ironmongery:
Rise & fall aluminium hinges - Ref: EXH-AT20
Recessed Indicator & Keep - Ref: EXL-A20
Leg 150mm - Ref: EXL-A150
Coat Hook - Ref:EXCH-A20
Brackets - Ref: EXB-A3/5

(Excludes Toilet Roll Holder)

T LINE 12mm
SGL Cubicle

Specifications

Pilasters and Headrail:
Extruded Aluminium Pilaster and Headrail profiles - SAA as standard
Hybrid & Nickel powder finishes available upon request

Doors & Divisions Panel Specification:
12mm compact solid grade laminate
Black core radius & polished edge finish

Standard Dimensions:
2000mm overall height (including 150mm ground clearance & 40mm headrail) x 1500mm deep

Ironmongery:
Rise & fall aluminium hinges - Ref: EXH-AT13
Recessed Indicator & Keep - Ref: EXL-A13
Leg 150mm - Ref: EXL-A150
Coat Hook - Ref:EXCH-A13
Brackets - Ref: EXB-A3/7 and EXB-A3/8

(Excludes Toilet Roll Holder)

T LINE 19mm
MFC Cubicle

Specifications

Pilasters and Headrail:
Extruded Aluminium Pilaster and Headrail profiles - SAA as standard
Hybrid & Nickel Powder finishes available upon request

Doors & Divisions Panel Specification:
19mm Moisture resistant melamine faced chipboard
All edges are lipped in high impact 2mm ABS

Standard Dimensions:
2000mm overall height (including 150mm ground clearance and 40mm Headrail) x 1500mm deep

Ironmongery:
Rise and fall aluminium hinges - Ref: EXH-AT20
Recessed Indicator and Keep - Ref: EXL-A20
Leg 150mm - Ref: EXL-A150
Coat Hook - Ref:EXCH-A20
Brackets - Ref: EXB-A3/5

(Excludes Toilet Roll Holder)

Ironmongery Finish: Satin anodised aluminium as standard (powder coated available upon request). Full Height option available upon request (up to 2700mm).
Colour Selections: Excelsior Cubicle & Washroom Colour Selection
Special Notes: Outward opening doors complete with back to back St/Steel ‘D’ Handles and full length ‘Z’ Section door Stop/Keep.

We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.