NBS Source PartnerSelect
Cubicle range
An efficient, practical & robust cubicle system
The Select Range is a tried and tested cubicle system comprising of High Pressure Laminate faced components, incorporating Excelsior’s own Aluminium range of Ironmongery as standard. The range offers 2 pilaster options which include a 20mm square edged version and a 20mm postformed version.
Select features:
Suitable for applications where superb appearance and medium use durability is required. Commercial office and educational environments can be greatly enhanced by the use of this attractive range.
Each panel element is edged with matching high impact 2mm ABS to enhance aesthetic appearance.
Cubicle ironmongery is provided in an aluminium finish as standard. Bespoke powder coated hardware can be supplied at an additional cost.
This range is not suitable for use in areas of high humidity (e.g. Showers).
Wall & duct panelling and fully framed vanity units can be supplied to complement this system.
The Select range is available on a short term delivery basis, typically 3-4 weeks from receipt of approved drawings.
Installation by Excelsior is strongly recommended but not essential as a full set of fixing instructions and
technical information is provided with the system.
Recommended sectors:
- Commercial Offices
- Leisure
Ironmongery
1
Indicator Faceplate
2
Indicator Slide Bolt
3
Aluminium Leg
3
Aluminium Hinge
Downloads
From creation to installation... you can rest assured
Excelsior have undertaken the manufacture, supply and installation of bespoke washroom products in all washroom environments since 1978. We have a wide selection of safe, attractive and reliable systems to suit all applications, from Nursery Schools right through to Leisure Centres and Hospitals.
Select cubicle range
1960mm high
Specifications
Doors, divisions & pilasters:
- High Pressure Laminate PUR bonded onto 18mm MR core
- 2mm ABS edge finish
Standard dimensions:
- 1960mm overall height
(including 150mm ground clearance) x 1500mm deep
Ironmongery:
- Rise and fall aluminium hinges - Ref: EXH-A20
- Recessed Indicator and Keep - Ref: EXL-A20
- Leg 150mm - Ref: EXL-A150
- Coat Hook - Ref:EXCH-A20
- Brackets - 20mm SAA Division U-Channel 20mm SAA Wall Pilaster J-Channel
- Headrail - Ref: EXPHR20
- Headrail End Caps - Ref: EXHREND
Toilet roll holder & accessories available upon request
Select Plus cubicle range
1960mm high
Specifications
Doors & divisions:
- High Pressure Laminate PUR bonded onto 18mm MR core
- 2mm ABS edge finish
Pilasters:
- High Pressure Laminate bonded onto 18mm MR core
- Postformed Vertical Edges
Standard dimensions:
- 1960mm overall height
(including 150mm ground clearance) x 1500mm deep
Ironmongery:
- Rise and fall aluminium hinges - Ref: EXH-A20
- Recessed Indicator and Keep - Ref: EXL-A20
- Leg 150mm - Ref: EXL-A150
- Coat Hook - Ref:EXCH-A20
- Brackets - 20mm SAA Division U-Channel 20mm SAA Wall Pilaster J-Channel
- Headrail - Ref: EXPHR20
- Headrail End Caps - Ref: EXHREND
Toilet roll holders & accessories available upon request
HPL - High Pressure Laminate
High pressure laminate (bonded onto a chipboard or MDF substrate. These core materials offer water resistance only (they are not waterproof) offers heat, scratch and impact resistance with edges finished with a colour match or contrast 2mm PVC detail. Comfortable in school, office, entertainment, health and retail environments alike.
- Protective overlay for printed decors.
- Decorative paper impregnated with melamine resin.
- Layers of kraft paper impregnated with phenolic resin, to be
bonded onto MR core.
Additional information
Ironmongery finish: Excelsior Semi Bright Anodised Aluminium as standard.
Colour selections: Excelsior preferred cubicle & washroom colour selection.
All Heights Subject to Material/Colour Selection. Images are a non standard gloss finish, available at additional cost
Special notes: Outward opening doors complete with back to back Aluminium ‘D’ Handles and full length ‘Z’ Section door Stop/Keep. 2100mm cubicle height available at additional cost.
We recommend that outward opening doors open onto an adjacent solid wall to prevent overstrain on hinges.
BIM objects - typical layouts
Downloadable BIM objects
Our BIM families are a time saving development with fully functional parametric objects. This highly acclaimed 3D model-based process is specifically designed for Infrastructure and Building projects. It offers many benefits to owners that enable simplicity for project management.
- Visualisation of designs
- Simulation of multiple design ideas
- Productivity improvement
- Analysing and testing of application and performance
BIM enables collaborative working; management of information as ‘one team’ within a digital model holding all the information required to design and construct the project from conception to completion.
